Liquid Syringe Tools
The right syringe for every application
Dedicated tools for 57mm or 85mm syringe needle lengths available
Syringes available: 1.2µL / 5µL / 10µL /100µL / 250µL / 500µL / 1'000µL / 10'000µL
For a detailed overview click on RTC Syringe Tools
LC-MS Tool
Rapid injection cycles with minimized carryover
Two needle lengths (standard 57mm, reinforced 80mm needle) available
Two syringe volumes (100µL and 250µL) available
The special design minimizes carryover even for the most sensitive detectors
Enables special injection techniques like sandwiching a sample between air gaps for accurate small volume injections
Flow control guarantees bubble-free solvent delivery
Position detection for zero dead volume positioning of syringe needle in the injector port
Headspace Tools
Constistent headspace sampling
Dedicated Tools for different syringe types available: 1mL / 2.5mL / 5mL (with corresponding tools)
Syringe temp. 40°C up to 150°C in 1°C steps
Syringe flush with inert gas flow through X-Y-Z rail
Magnetic vial transport for 2mL, 10mL and 20mL vials
For a detailed overview click on RTC Syringe Tools
SPME Arrow Tool
The tool to increase productivity in SPME
Holder for all PAL SPME Arrows 1.1 or 1.5mm
Max. penetration depth 70mm
Easy exchange of SPME Arrow by hand
Best conditioning is achieved with the SPME Arrow Conditioning Module
SPME Fibers are available with the following sorbents: PDMS, DVB, PA, Carbon WR, PDMS/Carbon WR, PDMS/Carbon WR/DVB
Application notes: Determination of iodoform in drinking water by SPME and GC-MS and Determination of C2-C12 aldehydes by SPME on-fiber derivatization and GC-MS
SPME Tool
The tool for fully automatic SPME sampling
New SPME holder for increased fiber protection
Compatible with a variety of SPME fibers
Easy fiber exchange by hand
For 10mm or 20mm fiber length
SPME Fibers are available with the following sorbents: PDMS, DVB, PA, Carbon WR, PDMS/Carbon WR, PDMS/Carbon WR/DVB
ITEX Dynamic Headspace Tool
Powerful sample enrichment for GC
Rapid and sensitive enrichment of volatile and semi-volatile compounds from solid, liquid and gaseous samples
Powerful dynamic headspace extractions with Tenax TA trap, other materials available
Active cooling to minimize idle times
Temperature range: 40 - 350°C for efficient desorption
PAL Robotic Tool Changes enables head space, SPME and ITEX-sampling within one sequence
Watch ITEX Dynamic Tool Video or see ITEX brochure
ITEX method development: an open access article from Laaks et al. is available.
Dilutor Tool
For efficient and accurate addition of larger amounts of liquids
For the addition of larger amounts of liquid: 100µL, 1mL (standard), 5mL & 10mL dispensing syringes available
With the special "transfer" mode also small volumes of liquids can be handled with high precision
Pipette Tool
Essential for Life Science, Clinical & Chemical Applications
For automated pipetting with 200µL or 1000µL tips
Single or multi-dispense mode
A Special adapter allows direct injection into LC-valves
Also work with capped vials in combination with the Decapper Module
comparison of different GC extraction techniques
