Liquid Syringe Tools

Liquid Syringe Tool
Liquid Syringe Tool

The right syringe for every application


Dedicated tools for 57mm or 85mm syringe needle lengths available

Syringes available: 1.2µL / 5µL / 10µL /100µL / 250µL / 500µL / 1'000µL / 10'000µL

For a detailed overview click on RTC Syringe Tools

LC-MS Tool

LC-MS Tools

Rapid injection cycles with minimized carryover 

Two needle lengths (standard 57mm, reinforced 80mm needle) available

Two syringe volumes (100µL and 250µL) available

The special design minimizes carryover even for the most sensitive detectors

Enables special injection techniques like sandwiching a sample between air gaps for accurate small volume injections

Flow control guarantees bubble-free solvent delivery

Position detection for zero dead volume positioning of syringe needle in the injector port

Watch LC-MS Tool Video

LC-MS-Tools brochure

Headspace Tools

PAL Headspace Tool
Headspace Tool

Constistent headspace sampling


Dedicated Tools for different syringe types available: 1mL / 2.5mL / 5mL (with corresponding tools)

Syringe temp. 40°C up to 150°C in 1°C steps

Syringe flush with inert gas flow through X-Y-Z rail

Magnetic vial transport for 2mL, 10mL and 20mL vials

For a detailed overview click on RTC Syringe Tools

SPME Arrow Tool

SPME Arrow

The tool to increase productivity in SPME

Holder for all PAL SPME Arrows 1.1 or 1.5mm

Max. penetration depth 70mm

Easy exchange of SPME Arrow by hand

Best conditioning is achieved with the SPME Arrow Conditioning Module

SPME Fibers are available with the following sorbents: PDMS, DVB, PA, Carbon WR, PDMS/Carbon WR, PDMS/Carbon WR/DVB

Read more…

Application notes: Determination of iodoform in drinking water by SPME and GC-MS   and Determination of C2-C12 aldehydes by SPME on-fiber derivatization and GC-MS



The tool for fully automatic SPME sampling


New SPME holder for increased fiber protection

Compatible with a variety of SPME fibers

Easy fiber exchange by hand

For 10mm or 20mm fiber length

SPME Fibers are available with the following sorbents: PDMS, DVB, PA, Carbon WR, PDMS/Carbon WR, PDMS/Carbon WR/DVB


ITEX Dynamic Headspace Tool

PAL ITEX Dynamic Headspace Tool
ITEX Dynamic Headspace Tool

Powerful sample enrichment for GC


Rapid and sensitive enrichment of volatile and semi-volatile compounds from solid, liquid and gaseous samples

Powerful dynamic headspace extractions with Tenax TA trap, other materials available

Active cooling to minimize idle times

Temperature range: 40 - 350°C for efficient desorption

PAL Robotic Tool Changes enables head space, SPME and ITEX-sampling within one sequence

Watch ITEX Dynamic Tool Video or see ITEX brochure

ITEX method development: an open access article from Laaks et al. is available.




Dilutor Tool

PAL Dilutor Tool
PAL Dilutor

For efficient and accurate addition of larger amounts of liquids


For the addition of larger amounts of liquid: 100µL, 1mL (standard), 5mL & 10mL dispensing syringes available

With the special "transfer" mode also small volumes of liquids can be handled with high precision


Read application note

Pipette Tool

PAL Pipette Tool
Pipette Tool

Essential for Life Science, Clinical  & Chemical Applications


For automated pipetting with 200µL or 1000µL tips

Single or multi-dispense mode

A Special adapter allows direct injection into LC-valves

Also work with capped vials in combination with the Decapper Module

See the Pipette Tool brochure

See Application Note - Automated pipetting and analysis of polymer suspensions for process control in chemical production

Feedback or questions?Search