New PAL System μSPE cartridges
Micro-SPE has developed as the new standard for extraction, clean-up, concentration, or filtration for automated green analytical workflows. The design of the new PAL System µSPE cartridge allows for the reliable automated processing with high sample throughput, accomplishing the principles of green sample preparation.
PAL System µSPE Hardware Kit
| Part No. | Description |
|---|---|
| PAL3-HW-uSPE54 | µSPE hardware kit for PAL System cartridges and PAL RTC 1 pc uSPE Liquid Tool D8/57 with Needle Guide for µSPE cartridges 2 pc Liquid smart syringe 1000µL (SF1000-57-T-22-FL), gauge 22, flat tip 1 pc Trayholder 2 pc VT54 rack (PAL3-Rack-VT54) 1 pc uSPE Cartridge Tray, 54 position, aluminum 1 pc uSPE Elution Tray Cover, 54 position aluminum 1 pc Waste Receptacle with drain 4 pc PAL uSPE cartridges for initial installation, 3-point teaching USB stick with installation guide (requires PAL RTC System. Vials, caps and PAL System uSPE cartridges need to be purchased separately) |
PAL System µSPE cartridges
One µSPE cartridge for a wide variety of food matrices. Highest selectivity: Optimized sorbent mixture retains a wide range of unwanted food matrices.
| Part No. | Description |
|---|---|
| PAL3-LCQuE1-30-T | PAL System µSPE cartridge-LC QuEChERS sorbent mix - 30 mg * Support for older firmware version on request by custom scripts * Firmware version 4.x supported by PAL Method Composer Version 1.5 (new PAL System µSPE sample prep steps) |
| PAL3-GCQuE1-45-V | PAL System µSPE cartridge-GC QuEChERS sorbent mix - 45 mg * Support for older firmware version on request by custom scripts * Firmware version 4.x supported by PAL Method Composer Version 1.5 (new PAL System µSPE sample prep steps) |
PAL System Accessories and recommended options
| Part No. | Description |
|---|---|
| PAL3-Vial-Lock-uSPE54 | μSPE elution tray cover to lock 2 mL vials in place, matching VT54 rack for use with uSPE cartridges |
| PAL3-Wasterecept-uSPE | μSPE waste receptacle to hold μSPE cartridge tray 54 or 96 positions includes waste adapter for mounting on bottom of tray holder |
| PAL3-Rack-Cart-uSPE54-B | Cartridge Tray to hold 96 μSPE cartridges in blister |
| PAL3-Rack-Cart-uSPE54 | Cartridge tray to hold 54 μSPE cartridges - also used for optional cartridge conditioning |
| PAL3-Rack-Cart-uSPE96 | Cartridge tray to hold 96 μSPE cartridges |
| Vial-1.5ND-GC-100 | Vial 2CV, 1.5 mL clear glass with label,12x32 mm, 1st class hydrolytic glass, fits ND9 Sscrew caps |
| Vial-0.3-ND9-PP-100 | Micro-vial 2CV, 0.3 mL clear PP, 12x32 mm, with conical insert, fits ND9 screw caps |
| Cap-ND9-St-SP10Sb-100 | Screw cap 2CV. ND9, magnetic, Gold, Silicone/PTFE/Starburst-Slitted septum 1.0 mm, pack of 100 pcs |
| Cap-ND9-PP-SP10S-100 | Screw sap 2CV. ND9, PP, Silicone/PTFE/I-Slitted septum 1.0 mm, pack of 100 pcs |
