PAL3-TH-SLCMS-AWC-100DX
LC/MS setup, consisting of:
1 pc LC/MS-P-100DX Tool incl. 100 µl Smart Syringe, long 80 mm Needle and FEP Loop
1 pc 2-Channel Volumetric Pump incl. PAL Bus Connection cable
1 pc Wash Cup PEEK
1 pc PFA transfer tube 1/16" (for up to 850 mm)
2 pcs Solvent Bottle 1000 ml
2 pcs Solvent Inlet Tubing Kit PFA
• The combination of LC/MS Tool with the Wash Cup minimizes carryover and enables very fast injection cycles.
• The Volumetric pump delivers solvents precisely and accurately.
Attention: Does NOT require LC/MS Wash Module and Check Valve kit. For x-rails longer than 850 mm PAL3-TubeLC/MS-VP-X is required (to be ordered separately).
Requires PAL Series II with FW 4.12 or higher
