产品详情

PAL System LC/MS setup for 250 µl Smart Syringes, Needle Length 51 mm, including 2-Channel Volumetric Pump, Wash Cup PEEK

PAL3-TH-SLCMS-AWC-250

LC/MS setup, consisting of:
1 pc LC/MS-P-250 Tool incl. 250 µl Smart Syringe, needle and FEP loop
1 pc 2-Channel Volumetric Pump incl. PAL Bus Connection Cable
1 pc Wash Cup PEEK
1 pc PFA Transfer Tube 1/16" (for up to 850 mm)
2 pcs Solvent Bottle 1000 ml
2 pcs Solvent Inlet Tubing Kit PFA

• The combination of LC/MS Tool with the Wash Cup minimizes carryover and enables very fast injection cycles.
• The Volumetric pump delivers solvents precisely and accurately.
• Service interval is > 280'000 samples leading to high up-time and low maintenance cost.


Attention: Does NOT require LC/MS Wash Module and Check Valve kit. For x-rails longer than 850 mm PAL3-TubeLC/MS-VP-X is required (to be ordered separately).


Requires PAL Series II with FW 4.12 or higher
PAL3-TH-SLCMS-AWC-250

相关内容

SLCMS-250-PE

SLCMS-250-PE

PAL System Smart Syringe LC/MS 250 µl for LC/MS Tool
PAL3-LCMS-Ndl

PAL3-LCMS-Ndl

Needle for PAL LC/MS Tool, G22, PST 3
PAL3-LCMS-Ndl-C

PAL3-LCMS-Ndl-C

Coated Needle for PAL LC/MS Tool,
G22, PST 3
PAL3-ActWashCup-2ChV

PAL3-ActWashCup-2ChV

Wash Cup Setup, incl. 2-Channel Volumetric Pump, Wash Cup PEEK, Tubing, Solvent Bottles
PAL3-TH-SLCMS-AWC-100

PAL3-TH-SLCMS-AWC-100

PAL System LC/MS Setup for 100 µl Smart Syringes, Needle Length 51 mm,
including 2-Channel Volumetric Pump, Wash Cup PEEK

备件

PAL3-LCMS250VP-PFCFr-S

PAL3-LCMS250VP-PFCFr-S

Upgrade Kit for PFAS analysis
for PAL LC/MS Tool with 2-Channel Volumetric Pump and 250 µl Loop for up to 850 mm Systems
PAL3-LCMS250VP-PFCFr-X

PAL3-LCMS250VP-PFCFr-X

Upgrade Kit for PFAS analysis
for PAL LC/MS Tool with 2-Channel Volumetric Pump and 250 µl Loop for up to 1200 mm Systems
PAL3-TubeLCMS-VP

PAL3-TubeLCMS-VP

Tubing for Connection between LC/MS Tool and Volumetric Pump, PFA, for up to 850 mm PAL Systems
PAL3-TubeLCMS-VP-X

PAL3-TubeLCMS-VP-X

Tubing for connection between LC/MS Tool and Volumetric Pump, PFA, for up to 1200 mm PAL Systems
PAL3-LCMSLoop-250PEEK

PAL3-LCMSLoop-250PEEK

PEEK 250 µl Holding Loop for LC/MS Tool for PFAS analysis
PAL3-DilAspKit

PAL3-DilAspKit

Solvent Inlet Tubing Kit PFA for
PAL System Dilutor and LC/MS
PAL3-DilAspKit-170

PAL3-DilAspKit-170

Solvent Inlet Tubing Kit PFA 170 cm for
PAL System Dilutor and LC/MS
PAL3-DilAspKit-PEEK

PAL3-DilAspKit-PEEK

Solvent Inlet Tubing Kit for PFAS analysis for PAL System Dilutor and LC/MS
PAL3-LowNdlGdeRepl

PAL3-LowNdlGdeRepl

PAL System Needle Guide Replacement for Tools, without Vial Transport Magnets
PAL3-LCMSLoop

PAL3-LCMSLoop

Holding Loop (FEP) 100 µl for PAL LC/MS Tool
PAL3-WashCup-G22-PEEK

PAL3-WashCup-G22-PEEK

PEEK Wash Cup for Injection Valves for PFAS analysis
PAL3-Kit-ChkVlve

PAL3-Kit-ChkVlve

Check Valve Set for protection of PAL System LC/MS-P (membrane) Pumps
PAL3-TubLCMS-VP-PEEK

PAL3-TubLCMS-VP-PEEK

PEEK tubing for connection between LC/MS Tool and Volumetric Pump, for up to 850 mm PAL Systems, for PFAS analysis
PAL3-TubLCMS-VP-PEEK-X

PAL3-TubLCMS-VP-PEEK-X

PEEK tubing for connection between LC/MS Tool and Volumetric Pump, for up to 1200 mm PAL Systems, for PFAS analysis

相关内容

联系我们